new Hayes Rotary engine opened......Garbage.....shut em down !!
Here is a link to some pics. click here
|
We need a sticky of crap rotary mechanics/tuners.
|
I'm going to wait for the few Hayes people to jump in and say something.
Badass- This realy sucks. If I where you, I'd think about talking to a lawyer, and maybe some of the other people Hayes has ripped off. My .02. CJ |
Definitely get them listed as a shitty business with the BBB.
|
What that sucks! I'd start collecting what you can for the case. It appears that you got screwed. They should bend over backwards to fix this or pay you back for the engine and lost time at the VERY least.
Hope it all works out for you. |
I take it you didn't read the horror stories from ppl like Jim Labreck many years ago with them....
stay far far away............... |
I'm not surprised at all. A very well-respected engine builder (who has nothing but good things to say about most of his competitors) told me to avoid those guys. He didn't go into any detail though, just said they were shady.
|
Wow, that's crazy.
|
Actually, my brother owns a law firm and is a ruthless cut-throat lawyer hehe.....the good kind. It will cost me nothing to do everything I can to Take Down Hayes Rotary and make them think twice about messing over true rotorheads that pay their hard earned $$ !! I am in the process of taking pics. and gathering all the evidence. It may be a long shot BUT I have nothing to loose in trying.;) I would've posted pics. on this forum but lately it's impossible to do so. I have more pics. to come.
|
I can't even begin to describe how apauled I was when I saw the pic of the rotors they used. Horrid...
Here's proof enough boys, boycott and shut 'em down. |
If anyone has a story to share about a similar exprience with Hayes please post a reply or email me at talvendi@cs.com
|
This is exactly why I went with KDR for my rebuild. May be more expensive than some, may be longer than some, may be 6 hours away, but I know it'll be done right.
That really sucks, you should get at least a new engine and compensation for your time from them, and more if you make it a class action suit. Good luck man, keep us posted. |
Wow.
That's fraud. Negligence. And some fuc*ed up repugnant shi*t. I'm sure that with those photos and the "unbiased" testimony of a competent rotary mechanic *ahem* you can take them to the cleaners.... |
Originally posted by badass7 If anyone has a story to share about a similar exprience with Hayes please post a reply or email me at talvendi@cs.com |
Originally posted by pp13bnos I'm going to wait for the few Hayes people to jump in and say something. |
Jumpin' Jehosophat :eek:
Go get 'im, Teddy :D! |
Here, I'll start the list of shity FD mechanics.
1. All Mazda Dealerships 2. Hayes Rotary 3. ? 4. ? |
Okay, I'll share my experience. My car was shipped to KDR because my rebuilt Hayes ported motor blew an apex seal. Hayes shipped KDR a new rebuilt under warranty. That motor was bad. Hayes sent another rebuilt and that was bad. Hayes sent the third motor which was bad. Due to Dave at KDR being very busy and Hayes dragging their feet on the replacement motors my car ended up being at KDR for over 2 years.
Finally on the last bad motor Dave said he was not going to deal with the problem anymore. He already had dealt with other bad Hayes motors with other customers and it was costing him too much money. He told me he would rebuild it. I ended up paying Dave to rebuild it. I also paid for everytime Dave had to pull and replace all these bad motors. All in all my car was out of commission for a long long time due to bad Hayes motors. It also cost me a ton of money. Hayes did send KDR the parts needed to rebuild the motor. My car is running pretty good now after Steve Kan tuned it awhile ago. Ken |
Originally posted by LUV94RX7 Okay, I'll share my experience. My car was shipped to KDR because my rebuilt Hayes ported motor blew an apex seal. Hayes shipped KDR a new rebuilt under warranty. That motor was bad. Hayes sent another rebuilt and that was bad. Hayes sent the third motor which was bad. Due to Dave at KDR being very busy and Hayes dragging their feet on the replacement motors my car ended up being at KDR for over 2 years. Finally on the last bad motor Dave said he was not going to deal with the problem anymore. He already had dealt with other bad Hayes motors with other customers and it was costing him too much money. He told me he would rebuild it. I ended up paying Dave to rebuild it. I also paid for everytime Dave had to pull and replace all these bad motors. All in all my car was out of commission for a long long time due to bad Hayes motors. It also cost me a ton of money. Hayes did send KDR the parts needed to rebuild the motor. My car is running pretty good now after Steve Kan tuned it awhile ago. Ken |
Originally posted by LUV94RX7 Okay, I'll share my experience. My car was shipped to KDR because my rebuilt Hayes ported motor blew an apex seal. Hayes shipped KDR a new rebuilt under warranty. That motor was bad. Hayes sent another rebuilt and that was bad. Hayes sent the third motor which was bad. Due to Dave at KDR being very busy and Hayes dragging their feet on the replacement motors my car ended up being at KDR for over 2 years. Finally on the last bad motor Dave said he was not going to deal with the problem anymore. He already had dealt with other bad Hayes motors with other customers and it was costing him too much money. He told me he would rebuild it. I ended up paying Dave to rebuild it. I also paid for everytime Dave had to pull and replace all these bad motors. All in all my car was out of commission for a long long time due to bad Hayes motors. It also cost me a ton of money. Hayes did send KDR the parts needed to rebuild the motor. My car is running pretty good now after Steve Kan tuned it awhile ago. Ken |
Originally posted by apneablue Here, I'll start the list of shity FD mechanics. 1. All Mazda Dealerships 2. Hayes Rotary 3. ? 4. ? |
Some more pics. of my Hayes Rotary parts........ Click Here
|
Here's a little sample pic.
|
|
:eek: Holy mother of god dude, they actually put that in a motor?! That thing is scarred to hell and back.
|
All times are GMT -5. The time now is 03:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands