Kansas JoyRide

iTrader: (1)

I have 4 new 1000 cc injectors, which I purchased months ago, maybe even more than a year ago and never installed. I am now ready to make the change to these more modern injectors from the stock 550s and 1680 I am currently running. I have changed my plan after discovering that I will need more fuel than the 4000 cc combined total can provide, even allowing for increased flow capacity by driving them with more fuel pressure. I intend to purchase two more 1000 cc injectors and run two primary and 4 secondary, all 1000 cc. I already purchased a primary fuel rail to accommodate the new style top feed 1000 cc units in my primary slot, but I discovered that I need some adapters for the base of the injectors so that they fit and seal up to the existing holes for the stock primaries. Glen Weaver with Arizona Rotary Rockets is where I purchase the injectors originally. I have contacted him a couple of time and he said he would email information and prices but I have never gotten a response back. Not complaining about Glen by the way, he has been nothing but helpful to me, I just think he is too busy to mess with a small purchase like this. He did tell me at one point where he was buying the parts but I lost that info months ago and can not locate it now. I also will need a secondary fuel rail per-drilled for four injectors instead of two, which will need to line up with my Excessive LIM. If anyone can point me to the right resource for these parts it would be greatly appreciated. Also, if anyone is running this setup on their 7 and is tuning with FC-Datalogit, I would really appreciate a map to start from. I am a little concerned about the setting for transition and setup logic for six injectors. If anyone is willing to share I would really appreciated it. Thx RD

Railgun

http://shop.cj-motorsports.com/CJM-I...njadapters.htm

I'm also running 6x ID 1000 injectors and the transition is fine. Unfortunately I don't have acces to my car at the moment so I can't set you up with a map, but it'll be fine.

Kansas JoyRide

iTrader: (1)

Thanks for the info. This is exactly what I needed. Anyone else out there might be willing to share a map with me? I would love to be able to see the settings for dead time and transition.