Need: Template to Mount '99 Wing
#1
Senior Member
Thread Starter
Need: Template to Mount '99 Wing
The subject says it. Bought a '99 wing, and would like to get my hands on a template to ensure I drill the holes in the right places. Anyone have one, or know where I can get it? Thanks
#3
Senior Member
Join Date: Dec 2001
Location: Somewhere in California
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by curlybillbrosie
i made my own out of cardboard. if the holes are off slightly after that, just use a dremel to adjust the hole size
i made my own out of cardboard. if the holes are off slightly after that, just use a dremel to adjust the hole size
I posted this in another thread in the interior and exterior forums, but I wanted to ask you guys in the 3rd Gen forum too.
Also I see the following on the bottom of the wing and I wanted to know what you guys used for each one:
-two bolt holes, are the holes threaded? what kind of bolt should I use?
-one threaded, black pointed needle loooking thingy, what do I use for this one?
-white clip, is this a self locking clip? do I just drill a hole big enough for it to fit through and it will hold in place on its own?
thanks
Last edited by ludeowner; 05-01-03 at 05:27 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
SakeBomb Garage
SakeBomb Garage
0
09-04-15 05:20 PM
SakeBomb Garage
Vendor Classifieds
0
09-04-15 05:19 PM