Need some wiring help with oil level sender
#1
Full Member
Thread Starter
Join Date: Dec 2004
Location: wyoming
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Need some wiring help with oil level sender
i have searched but cant really find any good pics, im needing a pic of where the oil level wire plugs into. i cant find any wire on my harness that would plug into it. also i need a pic of where the oil sending unit plugs into. i have a wire that i think it plugs into but isnt quite long enough, so i dont know if i have something routed wrong or if its just not the right wire.
#2
In the Garage
iTrader: (2)
You are in luck. I pulled my motor yesterday and can get to that level sender wire easily. I will try and snap a pic of the oil level sender wire. BUT it is a white plug with a single dark blue/greenish colored wire. Plugs to the unit on the driver side of the oil pan. This wire splits off of the harness that connects to the alternator. That harness Y's from the fuse block in the engine bay, one section goes to the alt, the other section will have the level sender you are looking for on it.
The oil pressure sender wire is a single brown wire with a black rectangular plug. I can't get a pic that would actually help as that harness is not in my car atm...
The oil pressure sender wire is a single brown wire with a black rectangular plug. I can't get a pic that would actually help as that harness is not in my car atm...
Thread
Thread Starter
Forum
Replies
Last Post