need quick help (easy question about alternator)
#1
Senior Member
Thread Starter
Join Date: Feb 2001
Location: Carl Junction, MO
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
need quick help (easy question about alternator)
i just installed a pulley kit...but know i don't know what to torque the alternator nut to. any clues...i did a search on MSN and found 80-110 N/m ...does that sound about right?
#2
Rotary Freak
Join Date: Aug 2001
Location: Boston, MA
Posts: 1,635
Likes: 0
Received 0 Likes
on
0 Posts
http://www.rx7s.com/tandrracing/priv...shopmanual.htm
Click on Engine Electrical System. Check page 12 of that section.
Click on Engine Electrical System. Check page 12 of that section.
#3
Senior Member
Thread Starter
Join Date: Feb 2001
Location: Carl Junction, MO
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
if i wasn't straight i'd kiss ya! thanks!
for future searchers... 84-107 ft-lbs
water pump pulley is 70-104 ft-lbs
for future searchers... 84-107 ft-lbs
water pump pulley is 70-104 ft-lbs
Last edited by Mikey; 09-06-02 at 09:26 AM.
#5
Rotary Freak
Join Date: Aug 2001
Location: Boston, MA
Posts: 1,635
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Mikey
if i wasn't straight i'd kiss ya! thanks!
for future searchers... 84-107 ft-lbs
water pump pulley is 70-104 ft-lbs
if i wasn't straight i'd kiss ya! thanks!
for future searchers... 84-107 ft-lbs
water pump pulley is 70-104 ft-lbs
#6
Rotary Freak
Water pump pulley has 4 bolts 10 mm you tighten yours to 70 to 104 ft-lbs if you wish ,I would tell any one that about 8 ft -lbs will do . If you have 10mm bolts that will take 70 ft -lbs I will wont to buy some.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM