NTIMD8

iTrader: (1)

Hi guys, I was wondering if anyone could hook me up with a picture of the stock midpipe. In particular I am looking to see how the air pump is connected to the stock cat.

I have a midpipe with a high-flow cat that is welded into it and the cat has a tube for an air pump. Just wondering what I need to get the line coming from the pump hooked up to the tube on the new cat.

I don't have access to my car right now so I can't look myself.

Thanks, J

Mahjik

iTrader: (1)

Basically, you need the check valve and some high temp rubber tubing to connect up the split air tube to the hi-flo cat tube.

NTIMD8

iTrader: (1)

Is the check valve something I need to buy or is it already on the stock system? Also would you have any idea as to the size of the tubing I would need and what length?

Thanks for any help!

Mahjik

iTrader: (1)

IIRC, you'll need to cut the check valve off the stock tubing and then re-use it. Sorry for not a lot of details, its been since 2001 since I had to do any of that.

NTIMD8

iTrader: (1)

No problem. Thanks very much for the info!!