Need Help with wiring gremlins
#1
Full Member
Thread Starter
Join Date: Jul 2004
Location: Davenport
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Need Help with wiring gremlins
Hey guys I have run into a few gremlins in this new rx7 project and need some input.
Things That do not work:
parking lights, dash lights, interior lights
Tach bounces all around......
No brake lights or turn signals out the rear.... They click but thats about it.
Help needed!
Things That do not work:
parking lights, dash lights, interior lights
Tach bounces all around......
No brake lights or turn signals out the rear.... They click but thats about it.
Help needed!
#3
yeah check the fuses and relays, don't forget the one under the air duct that covers the front section of the engine (part of the intake and intercooler)
Last time one of those relays was bad and it caused all sorts of problems
Last time one of those relays was bad and it caused all sorts of problems
#4
Full Member
Thread Starter
Join Date: Jul 2004
Location: Davenport
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
I got the car as a basket case... I have pulled the dash to fix some hacked wires and ended up swaping in another front harness.... Can anyone link me to a diagram with locations of relays and fuses to check. This car is complicated compared to other things I have worked on.
The turn signal thing baffles me.... No dome light either.
The turn signal thing baffles me.... No dome light either.
#6
Im a tall midget.
iTrader: (28)
The yellow ones connect to the ECU, the small black one goes to a little black box thats in there somewhere, and the blue one goes to another blue connector. You pretty much match the colors. Just poke around and match the connectors. Im pretty sure all of them are different and only plug in to their male/female counterparts.
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM