RX7Club.com - Mazda RX7 Forum

3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:
Full Detail Automotive

need help with some performance mods

   
Old Apr 29, 2002 | 11:38 AM
Share
  #1  
ttpowerd's Avatar
ttpowerd
Thread Starter
HARRRRRRRRR
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 1,858
Likes: 0
From: Marietta GA
need help with some performance mods
Alright, I have the pettit ecu and I was wondering if it would be ok to have the following mods on it?

intake
dp
mp
cb
efini y pipe
fmic
non sequential
ported wg

Will I run lean? Any help is appreciated. TIA
Reply
0
Old Apr 29, 2002 | 11:39 AM
Share
  #2  
ttpowerd's Avatar
ttpowerd
Thread Starter
HARRRRRRRRR
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 1,858
Likes: 0
From: Marietta GA
oh, running about 12-13 psi.

Thanks
Reply
0
Old Apr 29, 2002 | 12:43 PM
Share
  #3  
ttpowerd's Avatar
ttpowerd
Thread Starter
HARRRRRRRRR
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 1,858
Likes: 0
From: Marietta GA
anyone???
Reply
0
Old Apr 29, 2002 | 12:48 PM
Share
  #4  
Bucrx7's Avatar
Bucrx7
Senior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 724
Likes: 0
From: Massachusetts
If the ECU is programmed for 14.7 then it should be fine. The majority of the petitt's ecu is programmed for you mods + street port. Make sure ecu is programmed for all bolts on.
Reply
0
Old Apr 29, 2002 | 12:51 PM
Share
  #5  
Street King's Avatar
Street King
*** Bless Texas!
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 775
Likes: 0
From: TX
what psi can stock injectors hold 90%injector duty on ttpowered set up?
Reply
0
Old Apr 29, 2002 | 01:08 PM
Share
  #6  
GsrSol's Avatar
GsrSol
Z06 powered FD
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,883
Likes: 0
From: Dallas, Texas
If it's the Unlimited it will be fine. Non-Unlimited isn't suppose to support a mp.
Last edited by GsrSol; Apr 29, 2002 at 01:21 PM.
Reply
0
Old Apr 29, 2002 | 01:12 PM
Share
  #7  
Bucrx7's Avatar
Bucrx7
Senior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 724
Likes: 0
From: Massachusetts
Originally posted by Street King
what psi can stock injectors hold 90%injector duty on ttpowered set up?
I believe the pettit ecu is program to run 100% duty cycle at 12>psi.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
De-mods are my favorite mods
msilvia
3rd Generation Specific (1993-2002)
164
Mar 8, 2020 08:00 PM
hogged out vs boost prepped (Nikki)
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Back to Subforum
3rd Generation Specific (1993-2002)
View Next Unread
Oil pressure question.


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 01:11 AM.