need help from rx7.com secondary fuel rail owners
 

I need to know if the c-clip on the injector sits flush with the bottom of the fuel rail or not. My c-clips do not touch the fuel rail. I've had a bad leak creep up on me suddenly as described here: https://www.rx7club.com/3rd-generation-specific-1993-2002-16/engine-almost-caugt-fire-rx7-com-fuel-rail-problem-494741/

both injectors will spray fuel from the rail when side pressure is applied to them, im not sure if this is normal or if I am fighting a gas tank overpresurization problem.

I have their 1600 secondary rail setup for my FD. Not liking how the injector bottom "O" rings seats against the bottom in the LIM, I then bought the "spacers" which make them seal and align up better. I consider these a must for a good installation! They might now be part of their newer kits for the FD.

http://www.rx7store.net/category_s/90.htm

nice to know. I went ahead and put them on order. This seems to be a serious safety issue.

i think my injectors are different, not sure if those spacers are going to work. I dont have an o ring or pintel cap on the bottom of my injectors like others have that I've seen.