3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Need Help...Odd Noise

Old Jul 21, 2002 | 05:30 PM
  #1  
Jammer5703's Avatar
Thread Starter
Banned. I got OWNED!!!
 
Joined: May 2002
Posts: 107
Likes: 0
From: Baltimore
Question Need Help...Odd Noise

I've had my FD about 2 months and it drives great, pulls well, and all that. Only about a week or two ago I started noticing what sounds like a metal rubbing on metal squeak. It only happens during easy driving. I always let the everything warm up until the temp guage reads over 175F (aftermarket obviously). If I'm doing roughly 35-40 MPH in third or fourth gear (on flat ground or an incline) and I press the gas to the point just before where if you press it anymore you know the turbos will start pressing. When I do this it makes the metal on metal noise. I've been driving around trying to listen and see what the sound could be. I originally thought it was maybe the U-joints or the wheels (moving parts besides in the engine bay), but I wondering if it's the turbos (maybe out of balance). The thing is both primary and secondary boost fine with a 10/11-9-10 pattern. Any ideas? Anything I can check or look at to see if it is the turbos?

Also I have a dp and cat back and its not the normal noise of the turbos spooling.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gxl90rx7
Haltech Forum
6
Jun 30, 2017 11:30 PM
Linda_Lovelace
General Rotary Tech Support
0
Sep 18, 2015 10:04 PM
zxrazorxz
3rd Generation Specific (1993-2002)
2
Sep 14, 2015 07:21 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:40 PM.