Hi,

I'm having a hard time rewiring a cut connector on my 1993 5 spd engine emissions harness. Two of the cut wires at pins 6 + 7 are the same shade of orange (pin 7 wire is supposed to be yellow).

Just wondering if someone with a good 5 spd harness... #N3A1-18-051e
and an ohm meter - multitester can tell me which 2 numbered connectors of the first engine side wire branch pins 6 + 7 are wired to ?

Note: pic below is of an auto harness. It was the only full harness pic I could find.

I've tried without success to just buy an eBay harness for reference purposes without success. Cheap emissions harnesses offered on this site appear to be broken or missing components and not suitable for comparison purposes.

The white x-14 connector may be related to gear range connections for neutral, 1st + 2nd gears. Not certain however. The schematic was for 1994.

Thanks for any help you can provide.




Hosted on image shack. Can't find a way to get a full size image instead of a thumnail ... x-14 white connector circled yellow