3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Need help identifying these

Thread Tools
 
Search this Thread
 
Old 05-16-17, 03:07 PM
  #1  
Senior Member

Thread Starter
 
Skip2MyPou's Avatar
 
Join Date: Apr 2007
Location: Canada
Posts: 281
Received 0 Likes on 0 Posts
Need help identifying these

Hi, just wondering if I could get some assistance as to what is circled in these pictures
https://imgur.com/a/EycAv


Thanks!

Last edited by Skip2MyPou; 05-17-17 at 02:24 AM.
Old 05-16-17, 03:18 PM
  #2  
My girl

iTrader: (3)
 
Houstonderk's Avatar
 
Join Date: Apr 2004
Location: Andrews AFB, MD
Posts: 2,173
Likes: 0
Received 2 Likes on 2 Posts
Lower one should be a vacuum line for the oil injector. The top is the feed for the coolant to the back of the water pump that can be seen with a black cap as already on it.
Old 05-16-17, 04:08 PM
  #3  
Senior Member

Thread Starter
 
Skip2MyPou's Avatar
 
Join Date: Apr 2007
Location: Canada
Posts: 281
Received 0 Likes on 0 Posts
Originally Posted by Houstonderk
Lower one should be a vacuum line for the oil injector. The top is the feed for the coolant to the back of the water pump that can be seen with a black cap as already on it.
Should those two things be blocked off or covered? What is that hose supposed to be connected to?
Old 05-18-17, 05:14 PM
  #4  
Sponsor
iTrader: (41)
 
IRPerformance's Avatar
 
Join Date: Apr 2003
Location: NJ
Posts: 11,347
Received 318 Likes on 190 Posts
The one on the right is part of the throttle body coolant routing. Most likely they plugged it on the rear iron as well. If you are going to remove those I like to pull the nipples and tap for a npt plug. The caps tend to split and leak.




All times are GMT -5. The time now is 01:44 PM.