hwnd

iTrader: (4)

I'm in the process of removing a few unused plugs from the body harness and noticed two boxes thats new to me.

The smaller one looks like a resistor for the stock igniter and i'm unsure about the other box. My next question is, If I remove these boxes what side effects might i notice? I do not have plans to use the stock ignition whatsoever.

badddrx7

iTrader: (7)

Silver box = Fuel pump resistor

Small gray box = Ignitor resistor



You cannot remove the Ignitor resistor, however you can remove the pump pump resistor if you perform a direct wireup to the fuel pump. Details on Z-28 of you manual


Later

hwnd

iTrader: (4)

Thanks for the reply! I just found them on Z-28.

I'm wondering if I need these at all. The standalone has on-board coil drivers and the coils i'm using also have coil amps on-board. So I'm not sure that I even need it. I'm removign the ignition amplifier altogether as I dont use it.

If I remove them, I'll need to wire in my own relay for the fuel pumps, etc. Just not sure about the resisters and why they're even in place to start with.