Need advise where to jack car from front wheel pic be nice
08-13-03, 07:33 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2002
Location: Langley
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Need advise where to jack car from front wheel pic be nice
Hey guys i have an oil pan leak, and boy has it really caked alot of oil around the undercarriage area of the car. I have decided to jack the car up and do some extensive cleaning and maybe tighten the oil pan bolts to see if that helps in controlling the amount of oil I am losing until i do finally go ahead and replace the oil pan. Pics or site that shows pics of proper places to jack the third gen would greatly be appreciated.
08-13-03, 07:54 PM
#2
Rotary Enthusiast
Join Date: May 2002
Location: Tallahassee, FL
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
try the thick silver bars that look like they make a 'V' i don't have a pic and i know this was a dumbshit attempt to be simple but if it helps then good 
08-13-03, 08:56 PM
#4
I'm a CF and poop smith
wow, my old pics still get links 
BTW: the rhino ramps i have used have gone down 10 bucks to 24 bucks at any checkers. Mines still work very nicely and are super easy to use. oh yeah, my car's front has been dropped an additional 1/2-1 inch so now my car's front is pretty much 4 inchs off the ground and I still dont scrape/bang the front of my car on my modded ramps.
goodluck and remember to always use jackstands even with the ramps! i use them even with metal reinforced ramps, you never know...
BTW: the rhino ramps i have used have gone down 10 bucks to 24 bucks at any checkers. Mines still work very nicely and are super easy to use. oh yeah, my car's front has been dropped an additional 1/2-1 inch so now my car's front is pretty much 4 inchs off the ground and I still dont scrape/bang the front of my car on my modded ramps.
goodluck and remember to always use jackstands even with the ramps! i use them even with metal reinforced ramps, you never know...
