I pulled the engine less trany. I'm stuffing the new one in this weekend. I've got a load leveler but I need some advice on good engine pickup points. The OEM lift point on the front housing is fine but I need a couple of lift points in the back and there's not any good spots. suggestions?

 

There should be a hook on the firewall side of the UIM.

If you have lost that hook, you can use some thick washers and a bolt onto a LIM stud to attach the hoist chain.

 

Here's a shot showing the hook you should have:

http://mahjik.homestead.com/files/ho...3/MVC-004F.JPG