3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

is my motor blown?

Thread Tools
 
Search this Thread
 
Old 10-09-06, 02:20 PM
  #1  
Junior Member

Thread Starter
 
MazRacerx7xx's Avatar
 
Join Date: Jul 2006
Location: New York
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
is my motor blown?

i have a 93 the other day i was driving and the little red light started beeping saying to add coolant.So today i tapped off the antifreeze,started it up and the idle was stuck at 2500 rpm, blowing smoke and then i notice the temp was about a hair away from HOT.so i shut it down.any ideas?or have similar problems?
Old 10-09-06, 04:07 PM
  #2  
Rotary Enthusiast

iTrader: (5)
 
tt7hvn's Avatar
 
Join Date: Nov 2005
Location: New Bern, NC
Posts: 1,319
Likes: 0
Received 1 Like on 1 Post
it could be a number of things, check your thermostat to see if that's within tolerance

your AWS could be goin haywire, i think there is a relay for that.....

another great thing to do is to unplug your battery for like 5 mins, this will reset everything in the ECU which sometimes seems to cure problems in FDs
Old 10-09-06, 06:00 PM
  #3  
Junior Member

Thread Starter
 
MazRacerx7xx's Avatar
 
Join Date: Jul 2006
Location: New York
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
thanx I'll give those a try.It sucks because I just got it back from Mazda due to a bad fuelpump /filter.Not even a day later this happen.I never had a coolant leak or overheating issue in 2 years of owning the car until I took it to Mazda.One more Q? I have the Apexi F1 commader will that reset if I disconnect the battery???
Old 10-09-06, 07:15 PM
  #4  
Original Gangster/Rotary!


iTrader: (213)
 
GoodfellaFD3S's Avatar
 
Join Date: Mar 2001
Location: FL-->NJ/NYC again!
Posts: 30,529
Received 539 Likes on 326 Posts
I do not recommend EVER bringing your car to mazda. They probably screwed something up, it's not coincidence that your car is now overheating.

Where in NY are you? If you're close to clifton in northern nj, you should look into bringing your FD to rotary experiment seven here on the forum. Shoot him a PM, he'll get your car running like new
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
whinin
Introduce yourself
17
03-30-19 07:53 PM
doritoloco
New Member RX-7 Technical
7
09-05-15 12:41 PM



Quick Reply: is my motor blown?



All times are GMT -5. The time now is 04:56 PM.