My mods plan - please give input
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Austin, TX
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
My mods plan - please give input
Ok, I have a completely stock 1993 RX-7 with 36,000 miles on it and I want to do some reliability mods. These are the mods I plan to do (this is the order I plan to do them in):
1) Pettit AST
2) Turbo Timer
3) Downpipe
4) Fluidyne Radiator
Will these modifications work in this order with a stock set up? Could I also throw in a K & N Air filter into the mix? Besides the increased reliability, what kind of HP increase can I expect (if any)?
Thank you!
P.S. - About searching the forums - I have searched and I just wanted some direct input on my specific condition. Thanks again!
1) Pettit AST
2) Turbo Timer
3) Downpipe
4) Fluidyne Radiator
Will these modifications work in this order with a stock set up? Could I also throw in a K & N Air filter into the mix? Besides the increased reliability, what kind of HP increase can I expect (if any)?
Thank you!
P.S. - About searching the forums - I have searched and I just wanted some direct input on my specific condition. Thanks again!
#2
Full Member
Join Date: Oct 2002
Location: Danville, Califonia
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Thats a good mod list to start out with. All those mods are mostly reliability mods. Adding the k&n filters and cat back will also give you good performance. Thats as far as u want to go without getting a new ecu though.
#3
you can easily do these mods and more (cb,pulleys,ic) without the cu upgrade(i dynoed w dp,cb and open stock airbox @ 11 to 1 afr) there is much documentation to support this...go creazy, have fun but make sure everything is done right and one thing at a time
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM