My gearbox problem!!!
#1
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Waterford, Ireland
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
My gearbox problem!!!
Hey hey,
have a 92 fd3s tt manual,
Just want to pick ye'r brains!!
The last night the transmission has started making noises, only way i can describe it is like loose bolts rolling around inside it!
Just to specisify more, when just ticking over in neutral it sounds this way, when i press the clutch to just before biting point, (preload ?), it stops completely then when i press the clutch to the floor fully it starts again but not as bad! it also make the noise when at low speeds.... cant hear it at high speeds but dont know if it stops or i just cant hear it!!!
Am i right in thinking is it the throw out bearing?
Thanks guys
have a 92 fd3s tt manual,
Just want to pick ye'r brains!!
The last night the transmission has started making noises, only way i can describe it is like loose bolts rolling around inside it!
Just to specisify more, when just ticking over in neutral it sounds this way, when i press the clutch to just before biting point, (preload ?), it stops completely then when i press the clutch to the floor fully it starts again but not as bad! it also make the noise when at low speeds.... cant hear it at high speeds but dont know if it stops or i just cant hear it!!!
Am i right in thinking is it the throw out bearing?
Thanks guys
Last edited by sullyirl; 12-17-07 at 03:37 PM.
#3
Junior Member
Thread Starter
Join Date: Dec 2007
Location: Waterford, Ireland
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
cheers thanks for that, just needed a bit of back up lol
going to drop the box and replace that and see what happens!
Any good guides ye know of online for help? lol
going to drop the box and replace that and see what happens!
Any good guides ye know of online for help? lol
#4
https://www.rx7club.com/3rd-gen-archives-73/tech-manual-directory-614824/
its pretty straight forward.
remove the exhaust.
remove the drive shaft.
remove the gear shifter.
remove the starter.
remove the trans bolts.
then http://71.102.125.165/rx7/pullclutch.htm
its pretty straight forward.
remove the exhaust.
remove the drive shaft.
remove the gear shifter.
remove the starter.
remove the trans bolts.
then http://71.102.125.165/rx7/pullclutch.htm
#6
same thing just a different link.
http://youtube.com/watch?v=uPCi4RpGQCU
http://youtube.com/watch?v=uPCi4RpGQCU
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM