SammyD

Anyone done this?

I have a Momo on there now. I haven't removed the cruise control swith from the stock wheel, but I don't see why a bracket couldn't be fabricated and then screwed onto the Momo...

Mahjik

iTrader: (1)

Several people have done. However, the forum is "weight reduction" happy so they usually use that excuse to remove the cruise control from the engine bay.

I have a friend local who did it. I don't have any pictures, but it can be and has been done.

Chadwick

iTrader: (12)

I used two small screws and attached it to the bezel that came with my new wheel. Has worked like that for 4 years now.

rotoober

iTrader: (3)

https://www.rx7club.com/showthread.p...cruise+control

See if this helps... Did mine last december.

mono4lamar

iTrader: (32)

haha does anyone know how much the cruise control assembly weighs all together? usually weight loss is minimal but the room is crutial...