I just tried firing up my motor for the first time but, The relays don't click, I have no power to cluster, brake lights... The windsheild wiper works and I can crank the motor over... Why do I not hear any of the relays clicking???

 

Fuse. More specifically, your ignition circuit fuse.

 

No. The fuses are good

 

EGI relay

is the fuel pump coming on?

 

Fuel pump does not come on

 

right so swap make sure your main relays in the engine bay are seated and working properly, most importantly the green one

 

If I take out the relays and run power to them they click

 

So relays are good now be sure they are in the right locations and seated properly. Be sure the harnesses are hooked up properly etc...etc...

The fuel pump isn't coming on because it's not getting power solve that and your car might start. Hell just run a hot wire back to your fp from the battery and it should start assuming other things are hooked up properly

Download the manual on line and get that baby rolling so I can buy it hehe

 

ok so i think i found the problem... main fuse is blown... we will see if thats the problem when i replace it... fingers crossed

 

Ok. I got it started... .

 

when i start the car it only wants to stay on lik 3-5 sec and dies... when i give it a little gas it stays running for like 15-20 secs... what needs to be checked

 

I had a problem with that white connector that is on top of the fuel pump assembly a few times. i had to unplug it and plug it back up a few times. Good luck other wise.

 

ok so the line that is on the bottom of the charcoal canister blew up... where do i connect the charcoal canister line uo in the engine bay... i am running NS so i have no where to put it... can i block it off

 

While a charcoal canister is not imperitive to the operation of any car, you COULD omit it from the routing, altogether...

Unless you live someplace FUCT like Cali, where the smog ***** will come after your *** like...

Well; you get the picture.