Modifying stock fuel hanger for AN lines/fittings
#1
Modifying stock fuel hanger for AN lines/fittings
I have been searching threads and found some on modifying the stock fuel hanger to fit in braided lines and fittings but not conclusive. The pump that I will be using will be the Walbro 450 and 2x2200cc sec. injectors running pump gas.
Aiming for 450-500 rwhp if not a lil more on the 362.
For those that had modified it, what process and what fittings did you guys went for those power levels.
Aiming for 450-500 rwhp if not a lil more on the 362.
For those that had modified it, what process and what fittings did you guys went for those power levels.