Which Metal Pipes for Stock setup?
#1
93 Touring
Thread Starter
Which Metal Pipes for Stock setup?
Wanting to change out the rubber hoses/pipes for the stock OEM intercooler and for the air intakes to the Stock airbox.
Really just a reliability mod to reduce the risk of any of these leaking over time.
Trouble is most that I see advertised are not for the stock intercooler or the stock airbox.
Anyone had luck with a brand for the stock setups?
thanks!
Really just a reliability mod to reduce the risk of any of these leaking over time.
Trouble is most that I see advertised are not for the stock intercooler or the stock airbox.
Anyone had luck with a brand for the stock setups?
thanks!
#3
94 Single Turbo FD
Join Date: May 2006
Location: Calgary, Alberta, Canada
Posts: 1,418
Likes: 0
Received 0 Likes
on
0 Posts
heres a set on this ic
http://cgi.ebay.ca/1993-mazda-rx7-St...QQcmdZViewItem
heres a kit for the intake
http://cgi.ebay.ca/Bomz-93-94-95-97-...QQcmdZViewItem
http://cgi.ebay.ca/1993-mazda-rx7-St...QQcmdZViewItem
heres a kit for the intake
http://cgi.ebay.ca/Bomz-93-94-95-97-...QQcmdZViewItem
#5
Rotary Enthusiast
I have a nice set of RE hard pipes for the stock I/C that I had heat treated in grey ice 2000 degree coating complete with new hose tecniques clamps and black couplers. I never installed them since they will not fit my custom stock mount I/C . but they will be great for the stock I/C. PM me for pics and price if interested.
Jeff
Jeff
#6
94 Single Turbo FD
Join Date: May 2006
Location: Calgary, Alberta, Canada
Posts: 1,418
Likes: 0
Received 0 Likes
on
0 Posts
the upper intake pipe will fit the stock airbox, i used one on a m2 cold air intake box which plumb into the same location as stock. its the bottom intake pipe that will give u some trouble, u just have to trim it to fit, its tight but will work. if your not upto the task of custom fitting dont bother with it though.
Thread
Thread Starter
Forum
Replies
Last Post