manual boost controller
Thread Starter
Joined: Apr 2003
Posts: 1,342
Likes: 0
From: Temple city, CA
manual boost controller
Looking around the forums and all I see is people talking about the electronic ones. Anyone know any good mbc and place to buy one?
Originally Posted by ManGaZeRo
Looking around the forums and all I see is people talking about the electronic ones. Anyone know any good mbc and place to buy one?
My homemade ball and spring regulates just fine.. and no spiking
yep, try a home made ball and spring type. mines cost me 15 bucks to make at hd or lowes and it works fine (i have full straight exhuast, intercooler, intake, all metal piping for intercooler pipes and a stock ecu and still retain a 10-8-10 psi boost curve). a turn of the screw for me makes my boost relibly go up or down 1/2 a psi 
just start off with it in the full open position and very very slowly turn the boost up. do multipul runs to redline in 1st, 2nd and 3rd gear (not only is it safer to go slowly, its lots of fun even at low boost
)

just start off with it in the full open position and very very slowly turn the boost up. do multipul runs to redline in 1st, 2nd and 3rd gear (not only is it safer to go slowly, its lots of fun even at low boost
)
Joined: Jul 2002
Posts: 724
Likes: 0
From: 195 Miles West of Bridgeport, WA
Turbosmart ( http://www.turbosmart.com.au/ ) they make some really good products. Myself and several others I know have been running their MBC's for a while and they are work like a champ.
Trending Topics
i did the home depot bit for a while but it became a PITA if you wanted to change anything...Pull over - Open Hood - Turn the dial - Jump in and test - too much - jump out - pop hood - dial down...Ahhhhhhh
Originally Posted by Fd3BOOST
"and they are work like a champ"


Thread Starter
Joined: Apr 2003
Posts: 1,342
Likes: 0
From: Temple city, CA
Originally Posted by apneablue
i did the home depot bit for a while but it became a PITA if you wanted to change anything...Pull over - Open Hood - Turn the dial - Jump in and test - too much - jump out - pop hood - dial down...Ahhhhhhh
Originally Posted by ManGaZeRo
Isn't that the problem with all mbc?
But yeah....they do work great.
http://www.hallmanboostcontroller.com/
I have the evolution (cockpit mounted) and love it, very fine adjustability
I have the evolution (cockpit mounted) and love it, very fine adjustability
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
stickmantijuana
MoTeC
5
Sep 10, 2015 07:58 PM






