3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

low cp??

Thread Tools
 
Search this Thread
 
Old Nov 17, 2008 | 05:06 AM
  #1  
teri064's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2007
Posts: 49
Likes: 0
From: greece/athens
low cp??

Hello! Suddenly my 1995 fd3s and after i installed a large greddy intercooler , and a large radiator does this thing:
1) it doesnt turn on many times and makes the plugs full of gas
2) if it gets on it need 40lt of gas every 100 klm , and it has fire behind, black smoke etc
3) after 20 minutes of workin idle goes to 400 rpm , and it turns off.....
4) the second turbo doesnt work good because there is a hole on the manifold and there is so so so much gas

I said it to someone in greece and said 99% is low cp , and i need a total rebuild of everything. new rotors housings etc etc

What do you think? Isnt it possible that there might be something simple?
The motor has 115.000 klm on , but before 40.000klm had its apex seals changed by the last owner.

Could you give me some links of good mechanincs here so i can get a new engine or send mine for a rebuild? here in greece we have luck of these kind of engineers
Reply
Old Nov 17, 2008 | 06:11 AM
  #2  
thewird's Avatar
Lives on the Forum
Tenured Member: 15 Years
iTrader: (8)
 
Joined: Oct 2006
Posts: 6,603
Likes: 15
From: Toronto, Canada
Do a compression test. Might need a tune as well.

thewird
Reply
Old Nov 17, 2008 | 06:26 AM
  #3  
Ottoman's Avatar
always modding
Tenured Member 15 Years
 
Joined: Mar 2005
Posts: 1,667
Likes: 3
From: on a tiny island in the middle of a sea
after u changed the intercooler were u racing the car alot?

u might have damaged the motor..

after installing a front mount you were supposed to tune it..
Reply
Old Nov 17, 2008 | 06:35 AM
  #4  
Barry Bordes's Avatar
"Elusive, not deceptive!”
Tenured Member 15 Years
 
Joined: May 2007
Posts: 930
Likes: 13
From: Slidell, LA
Check to see if you knocked your MAP sensor tube off.
Barry
Reply
Old Nov 17, 2008 | 10:06 AM
  #5  
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 1,083
Likes: 4
From: california
^ check the map sensor.

Jeff
Reply
Old Nov 17, 2008 | 02:50 PM
  #6  
teri064's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2007
Posts: 49
Likes: 0
From: greece/athens
i didnt race at all after installin the intercooler
i did nothin at all just some quite rides
i HOPE its the map sensor.....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
Oct 17, 2020 03:25 PM
Logan Reinisch
General Rotary Tech Support
44
Sep 17, 2018 12:20 PM
Jmpabon93
New Member RX-7 Technical
1
Sep 30, 2015 04:57 PM




All times are GMT -5. The time now is 11:35 AM.