Im looking for a turbo, a good sized turbo, new/good condition. but i do not need the exhaust manifold, wastegate, or any of that because a shop is taking care of that cuz im a guinnea pig so to speak. suggestions on turbo size and places to look would be great.

 

Go with a T-66 Ball Bearing. It can make alot of power with the right set-up.

You can find it here:
http://www.turboneticsinc.com/

 

Ya might want to give http://www.thepartstrader.com/ a try.

 

Also, try posting the same thing in the Single Turbo forum. You'll probably get more replies there.

 

Im a big fan of the kind of power turbonetics can put down, but I dont want a ball bearing turbo. I would liek to be able to rebuild it if *knocks on wood* anything were to happen to it, ya know? Ill try posting in the parts trader and in the single turbo forum. Thanks.

 

you can go with a garrett t4 that turns out around 350 horses and will only short you $690

 

yeah, ive heard alot about the success that teh T4 has, but if im going to go single, im most likely looking for a number > 400hp .