My single turbo setup starts fine in cold but won't in warm. What might be the problem? everything in the engine was in part and what are the most importants thing to setup correctly in first start? When you start cold engine it starts and idle fine, but when the engine goes warm, it won't idle.

 

and i'm running with GT40 charger, Apexi Power FC, stock primary injectors and street ported engine.

 

please any ideas? when the water temperature reach about the 150F the problem comes true..

 

have u tried richening the mixture for warm starts?

sounds like the fuel enrichment map for cold start is ok.. but not the warm start

 

yeap, tried

 

when the engine is cold and it starts does it idle and run ok?

so it only stops working after u turn it off again and try to start?

what does your wide band show?

did u do the Idle learning mode correctly on the PFC?