Last minute suggestions anyone?
#51
Full Member
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Long Island, New York
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
after the porting and cleaning i sent the plates out to be lapped and renitrated
all 3 plates after alittle porting
had to custom make a box to fit these things, all together it was 83lbs, shipping was not cheap as you could imagine
...a week and a half later i got them back and oh were they nice
front plate lapped and re-nitrated
close up of the port
runner
center plate runners
cleaned up ready to go back together
had to get the product placement shot in there
cant wait til there is a rotor in there
all 3 plates after alittle porting
had to custom make a box to fit these things, all together it was 83lbs, shipping was not cheap as you could imagine
...a week and a half later i got them back and oh were they nice
front plate lapped and re-nitrated
close up of the port
runner
center plate runners
cleaned up ready to go back together
had to get the product placement shot in there
cant wait til there is a rotor in there
#52
Full Member
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Long Island, New York
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
ok so there is a big announcement, the rotary has been driving me nuts....so im jumping ship and going with a small block chevy
see its even painted to match.
i am soooooo kidding lol, thats just a project i did for a friend to help pay for the fd. figured that would ruffle a few feathers
see its even painted to match.
i am soooooo kidding lol, thats just a project i did for a friend to help pay for the fd. figured that would ruffle a few feathers
#55
Full Member
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Long Island, New York
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
i think im going to have everything powder coated this week, not sure on a color yet. and believe me as much as i love small blocks i wouldnt put one in an rx7, its just not right. the LS projects are all well and good but these cars were made to run a rotary and thats what should stay in them. that small block is going in a 68 chevelle, although i have been thinking about popping a 13b into a muscle car. but then people would think im trying to copy fast and the furious 3 with the rb26 in the rustang
#56
Banned. I got OWNED!!!
Join Date: Jul 2008
Location: orlando florida
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
yes
yes thats true...painting now is good,,carefull on quality of powder coating make sure the use blockoff plates to be sure it doesnt run over on the face of you housings and end plates...but you have the right idea shes comming toghether real good...
#57
Full Member
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Long Island, New York
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
ok so a guy in my fire department has the ultimate hookup with the local powder coating guy, its his brother in law. so what in particular has to be masked off so i can avoid banging my head against the wall later. obviously the mating surfaces of the rotor housings and irons, but what about the intake, can i just cover the runners and let them powdercoat all along the side?
#58
Full Member
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Long Island, New York
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
well the day has come. i ran out of extra money and hence cant pump money into the fd for alittle while. i posted this thread up a few days ago but there were no results, what do you guys think? assuming there are people still subscribed to this
https://www.rx7club.com/forum/showthread.php?t=778718
https://www.rx7club.com/forum/showthread.php?t=778718
#60
Full Member
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Long Island, New York
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
eh its going rather slow for now. thanks to the wonderful economy the FD got put on hold for a few months while i build up the bank account i drained buying it. but i am working on my '68 camaro at the moment getting some new sheetmetal on it and working with stuff i already have instead of buying new stuff for the FD. it will make a come back probably in late january/early february. thanks for asking. where in NY are you?
#63
Full Member
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Long Island, New York
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
mono, im about midway into suffolk county on the south shore about 70 miles east of nyc. do you have an FD?
thanks for the kind words timemachine, its killing me having it on hold but id rather wait til i have the money to get the project done right. i hate cutting corners
thanks for the kind words timemachine, its killing me having it on hold but id rather wait til i have the money to get the project done right. i hate cutting corners
#68
Full Member
iTrader: (2)
Join Date: Dec 2006
Location: connecticut
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
ya it is back when it was red I like that pick mostly for the tires. Its been pro streeted dana 60 with a full 8 point cage so it is my strait line car the rx will be for the turns. I add a few pics of our toys if you could could you post som of your 68. I do like the fact that their is another old hot rodder trying to convert to the rx.
Last edited by demkog; 12-06-08 at 07:41 PM. Reason: pics
#71
Full Member
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Long Island, New York
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
ya it is back when it was red I like that pick mostly for the tires. Its been pro streeted dana 60 with a full 8 point cage so it is my strait line car the rx will be for the turns. I add a few pics of our toys if you could could you post som of your 68. I do like the fact that their is another old hot rodder trying to convert to the rx.
#72
In the burnout box...
iTrader: (32)
I can send you a couple pictures if you would like (list your email). I'm not completely finished yet. I try not to post stuff anymore as everyone wants results and more information that I really don't have . My current setup is pretty much done. I've been having a lot of problems with Garrett, suppliers, and slow shippers. The car didn't hit the road this year so I'm not too happy. Although, I've been right on target with my "completion date" which was "just in time for winter . I've got too many cars myself and too many other customers cars to work on. I'm sure you know the deal...
#74
Full Member
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Long Island, New York
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
I can send you a couple pictures if you would like (list your email). I'm not completely finished yet. I try not to post stuff anymore as everyone wants results and more information that I really don't have . My current setup is pretty much done. I've been having a lot of problems with Garrett, suppliers, and slow shippers. The car didn't hit the road this year so I'm not too happy. Although, I've been right on target with my "completion date" which was "just in time for winter . I've got too many cars myself and too many other customers cars to work on. I'm sure you know the deal...