3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Knock level and basic maintenance Qs

Thread Tools
 
Search this Thread
 
Old Oct 6, 2003 | 10:13 AM
  #1  
AndrewD's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 52
Likes: 0
From: Ames, IA
Knock level and basic maintenance Qs

Rotorians,

I posted on the PowerFC forum but seems that no one is reading that part of the page

I just installed my PFC with these mods : dp, mp, cat-back, fuel pump, efini y-pipe, crane ignition and pulleys. Currently I have the base map running since no tuners live less than 500 miles from Ames, IA. On the commander I saw a knock level peak of 73 after a "little bit" of hard run of boost 0.67 kg/cm2 (to be safe).

My question is : is it a normal number of knock level with the PFC? Or does it mean that I really,really need a tuning on the PFC?

Also I have another question on a very basic stuff. When you go to the dealership and change your oil, it seems that your steering wheel feel much firmer afterwards, what links/bolt do they tighten? Which part of the car needs lubrication regularly, aside from the engine of course?

Sorry for the long post, thanks in advance...

AndrewD
Reply
Old Oct 6, 2003 | 10:28 AM
  #2  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
The sharper steering is probably due to them putting air in your tires, how often do you check your tire pressure?

The knock level is not consistent from car-to-car. My mechanic has had cars that had knock values below 40 and were detonating. Also, when you shift or let off the throttle, the Commander will record those spikes. You need to see what the knock level under constant WOT is, not just a peak from driving around.

From what I've seen from most of the tuners, they don't pay attention to the knock readings until they get over 80-100 under steady WOT.

FWIW, my knock values vary considerably. One WOT run to redline in 3rd will peak at near 100 and another won't peak over 40-50. To me, that indicates that the 100 value is some extraneous engine noise that the microphone is picking up.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
Oct 17, 2020 03:25 PM
vish86
Interior / Exterior / Audio
3
Oct 1, 2015 11:53 PM
SpaceCadet_Alt3
Introduce yourself
1
Oct 1, 2015 11:35 PM




All times are GMT -5. The time now is 01:33 AM.