3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Knock

Old Sep 10, 2004 | 08:21 PM
  #1  
FastCat17's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 242
Likes: 0
From: La Junta, Colorado
Knock

Hey guys i have the apexi power fc with the commander and when im driving around the little knock bar gets like half the way to al the way and was wondering if this is bad or if its normal for you to see a little knock .....im just wondering why much is normal cause it kinda freaks me out when i give it hell...thanks!
Reply
Old Sep 11, 2004 | 02:29 PM
  #2  
RotorJoe's Avatar
Hooray For Boobies!!!
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 3,570
Likes: 1
From: Washington
Switch it to peak hold and look at the number it gives you. If you see anything above 70 it is probably bad and knocking. But every FD is different and depending on how good or well mounted your knock sensor is will affect the number.

Search in the PFC section and you will find some knock values that othes see and have seen. This will better give you an idea as to if your numbers are good or bad.

This could be moved or should have been started in the PFC section.

Last edited by x605p747R1; Sep 11, 2004 at 02:34 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
83revival
New Member RX-7 Technical
4
Sep 3, 2015 10:42 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:53 PM.