Mikey

i got the 1600 kit from the rx7store and i don't like the way the 1600cc injectors fit. the only way to make the rail sit on the rail "stand" is to completely remove the air bleed socket unit. when you do this, the injectors don't seal very well inside the holes. can somebody help me out. i did a search and saw that people used the top portion of the air bleed socket with the rx7.com ruel rail. is this the same rail as the k2rd? please help...i don't want fuel to be shooting out of the block i'll go take some pics!

rxrotary2_7

use a piece of 3/8 fuel line as a seal around the botom of the injector.