Just started new streetported motor!!
#1
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Nowhere
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Just started new streetported motor!!
5 Days of hard working I finally start up my streetport motor.
One of the oil cooler coupler came off so it leaked hell of oil it really scared **** out of me.
those couplers are really hard to connect so be careful.
I'm a little worried because my engine was running without oil for a sec.
but after reconnect that thing it ran smooth so I guess it's OK.
BTW I used rebuild kit from bruce(video guy) and he sent me street port template with great price..
thank all the forum member for the great info.
BTW it was my first rotary and it wasn't that bad only thing you need small finger.
thanks.
One of the oil cooler coupler came off so it leaked hell of oil it really scared **** out of me.
those couplers are really hard to connect so be careful.
I'm a little worried because my engine was running without oil for a sec.
but after reconnect that thing it ran smooth so I guess it's OK.
BTW I used rebuild kit from bruce(video guy) and he sent me street port template with great price..
thank all the forum member for the great info.
BTW it was my first rotary and it wasn't that bad only thing you need small finger.
thanks.
#3
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Nowhere
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
you can email him at Bruce1071@aol.com
he has all the overhaul kit too and price wa preety good.
good luck
he has all the overhaul kit too and price wa preety good.
good luck
Thread
Thread Starter
Forum
Replies
Last Post