i took my LIM off during my non-seq process and when i took the fuel rail off i noticed theirs these 2 plastic black things in there, don't know why these are their im sure because it came that way but i and a couple other people don't know why they are there, he suggested drill bigger holes but i don't want to do that, but i was just curious as to the purpose of them, tried a search but didnt get anything relevent....Thanks

 

Air bleed socket , rEplace if they are old ,they may break .If you put in large injectors cut the legs off and install the ring only .The primary injectors have defusers also, if you remove them the idle will not be as good .

 

What if you don't remove the legs??? I just put in 1300's and didn't remove them. Should I redo or will it be ok?