just had greddy BOV installed, need help
#1
Full Member
Thread Starter
Join Date: Apr 2002
Location: raleigh, nc
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
just had greddy BOV installed, need help
I just installed my greddy blow off valve and I am almost positve the internal stock BOV is still working and I would like to know if there was a way to remove the stock BOV so the greddy would handle all the pressure relief. I was wondering if the little brown do-dad on one of the hoses leading into my air intake is the stock BOV. Any answers would help-Brooks
#3
you should have a CRV and a BOV. And yes the stock BOV is brown and does lead to the intake. Where exactly did you hookup the GReddy BOV? You should see this nipple about 5/8" coming out of the manifold with a long black hose and then the stock BOV, you just take out the stock BOV and plug the GReddy unit in.
And there is no "internal" bov that i'm aware of...
Danny
And there is no "internal" bov that i'm aware of...
Danny
Thread
Thread Starter
Forum
Replies
Last Post