JDM MOMO steering wheel/horn hookup
07-26-03, 04:20 AM
#1
JDM MOMO steering wheel/horn hookup
Anyone done the conversion to us spec seven? I have traced the green wire from the steering wheel to the clockspring and then to the white three prong plug coming out of the steering column ,one prong for horn ,and two for cruise. momo wheel has a copper ring on the back for horn contact,i think.if i run a wire from the white plug to the copper ring will this give me horns ?
04-30-07, 07:32 PM
#4
Didnt want to make another thread so had to bump this because i ahve the same question.
Can i still use the clockspring with the momo hub? Cause there is no way to get the voltage from the horn wire to the hub unless you run like a 2 foot piece of wire for when you have to turn.
Can i still use the clockspring with the momo hub? Cause there is no way to get the voltage from the horn wire to the hub unless you run like a 2 foot piece of wire for when you have to turn.
