JDM FD build
Im taking delivery of my JDM FD this weekend. Im gonna tear into her pretty quickly. This is going to be my canyon carver/track car, Im hoping I like it as much as the car its replacing.
|
You'll love it. I'm just finishing my JDM build here. If you have any question or issues you run into hit me up. There are a few things you may notice different inside the engine bay if you haven't messed with a JDM car before.
|
I had an S13 K's prior to this car that was built, was my drift car. Ive never messed with a rotary before. So Ill def take you up on some question asking for sure. Thanks
|
Yeah. I've built 2 STI's, an Evo VIII, S13 converted 240sx, and finally my JDM '92 FD3S. What are your plans for the car?
My build is a very delicate balance of street/drift and 450-500 RWHP LOL! |
PM sent
|
looking forward to this.
|
Just dont come into the build expecting to be as bulletproof with knocking etc. as the SR. Know that the 13B is totally different and learn it.
|
Im under the impression that its going to be different. I hope its not as prone to problems as I read about them. My SR was literally bulletproof with the setup I was running. Ill do all the reliability mods to the FD prior to touching anything else on it.
|
Well I got 90,000 KM from my motor before I blew the front iron. It'll all just depend on how it was beaten before.
|
How do you guys get away with the JDM vehicles? I have seen a few posts of guys losing their cars.
|
Not sure about US import laws but in canada, there are twice as many JDM 7s as CDM. It just has to be an approved car that is at least 15 years old to get a JDM car here. And most cars are approved.
|
Originally Posted by Mitchocalypse
(Post 10478593)
Not sure about US import laws but in canada, there are twice as many JDM 7s as CDM. It just has to be an approved car that is at least 15 years old to get a JDM car here. And most cars are approved.
|
Originally Posted by akunochi
(Post 10477409)
S13 converted 240sx,
thats like saying i converted my fd3s into an rx7. |
Picked up some Work Rezax for the FD today, 18x9.5 18x10.5. Got them for $300 bucks locally. Just need to be painted.
http://i627.photobucket.com/albums/t...agtu/work1.jpg http://i627.photobucket.com/albums/t...agtu/work2.jpg |
Originally Posted by adamrs80
(Post 10478581)
How do you guys get away with the JDM vehicles? I have seen a few posts of guys losing their cars.
|
$300? eff you!
|
Originally Posted by GarageSpec
(Post 10479906)
Picked up some Work Rezax for the FD today, 18x9.5 18x10.5. Got them for $300 bucks locally. Just need to be painted.
http://i627.photobucket.com/albums/t...agtu/work1.jpg http://i627.photobucket.com/albums/t...agtu/work2.jpg Honestly though.. HOW did you find that deal. |
Originally Posted by jaggermouth
(Post 10479911)
$300? eff you!
It amazes me how people just give stuff away. Anyways, they are super clean. I got all of the centercaps, and stuff with them. As well as the OEM work lug wrench. Crazy deal. |
Originally Posted by Mitchocalypse
(Post 10479925)
Those are fucking ugly man.. how about this, I'll give you 500 bucks + ship for them then you can go get a decent set of rims. :suspect:
Honestly though.. HOW did you find that deal. But I wont ever sell them to you, just for your comments :) I found them on facebook |
Im compiling a list of mods to make this thing track worthy. Im gonna be drifting it this season and am more concerned with keeping her cool than anything. This is what Ive come up with thus far as a mod list. Dont flame me, Ive been reading for a couple of hours. If you having anything relavent to add or critisize, def chime in. Im new to this triangular motor thing...As I said above, it has coilovers, bov, Border downpipe/full exhaust (no cats), HKS drop in filter, R-magic grounding kit. Im also going to do a compression check and full tuneup (oil and all fluids, spark plugs, etc.) prior to doing anything else.
modded/ducted stock airbox oil cooler setup of some sort big radiator PowerFC and dyno tune FMIC and all hard piping (and perhaps some bigger secondary inj. if needed) I also need some opinions on spark plugs. I see people running 2 or one plug, and 2 of the a different plug. Anything else I should look for prior to going crazy with this thing. Im looking for a reliable 300whp. Ive never had a rotary, but Im down to learn as much as possible. Im good at the car thing, just want to ensure that this thing is prepared to handle what Im gonna be throwing at it. Suspension/LSD/chassis is simple to me compared to everything else. I know what needs to be done there. Thanks -Rich |
He was just making an over played joke haha. Reverse psychology ;)
Cant wait for the build |
I know. It was funny.
Im reading so much stuff right now. Im either gonna hate rotarys or love them after this experience. |
Originally Posted by ILoveJDM
(Post 10478662)
an s13 is a 240sx.
thats like saying i converted my fd3s into an rx7. I got a 240sx after my evo burnt down...then swapped in a SR20DET, Vertex front bumper, fenders and origin rear quarterpanel, R32 Skyline seats and Digital AC...... So by silvia swap I mean the front end swap /end |
there isnt a any differences, but the JDm cars always bring way more money. Well not always, but they should IMO.
|
Originally Posted by GarageSpec
(Post 10480062)
there isnt a any differences, but the JDm cars always bring way more money. Well not always, but they should IMO.
rhd fd3s in canada, $7-10k CDN, sub 100,xxx km's. rhd fairlady 300zx z32 Z, $5-10k CDN LHD fd3s in canada... 18k+? LHD 300zx 15? super funny when you see these in canada, you go "OMG a lhd 300zx, SICK"..ratio of rhd to lhd 300zx being like 5:1 here. not actually but you get the idea.
Originally Posted by akunochi
(Post 10480058)
So by silvia swap I mean the front end swap
/end anyways i actually kind of dig the wheels. its different. wish the lips were stepped though! |
All times are GMT -5. The time now is 08:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands