Intercooler Question
#1
Rotary Enthusiast
Thread Starter
Join Date: Oct 2002
Location: S.Cali, OC!
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
Intercooler Question
Alright, my stock ic is old and moldy, tons of oil in it and tons of bent fins...my friend with a evo 8 just got a new fmic so he gave me his stock one...its a nice size, its about 11 X 16 X 2.5 (fits perfect in opening of cwest bumper). I was wondering if i could custom fit it, and it will work better than stock...my mods are intake, dp, cb, powerfc, and koyo radiator. Should be fine if i get piping made for it right? I know that the stock evo runs 17 - 19 psi or something like that.
Thanks for Feedback
Phat
Thanks for Feedback
Phat
#2
Eats, Sleeps, Dreams Rotary
Join Date: May 2003
Location: MIA
Posts: 3,639
Likes: 0
Received 0 Likes
on
0 Posts
It should be, ANYTHING is better than our stock ones. I mean anything. Down here they will custom fit one for 90$, im trying to knock one from my friend with an SRT-4 convince him to get aftermarket. Good Luck make sure they make it look clean
#3
Rotary Enthusiast
Thread Starter
Join Date: Oct 2002
Location: S.Cali, OC!
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for the feedback, yeah this ones really clean if held up to the light you can see straight thru it, no real bad bent fins...yet haha
#4
Eats, Sleeps, Dreams Rotary
Join Date: May 2003
Location: MIA
Posts: 3,639
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by PhatManBUD
yet haha
yet haha
Good Luck, you should check if you get a pressure drop, I mean the stock IC drops 1 to 2 psi so you may have lag but hopefully not drop in PSI
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM