Installing my boost controller
06-30-03, 10:07 AM
#1
apeiron
Thread Starter
iTrader: (2)
Join Date: Oct 2002
Location: Boulder, CO
Posts: 1,773
Likes: 0
Received 0 Likes
on
0 Posts
Installing my boost controller
Guys. I'm installing my boost controller. I have a question though, since I now have a boost controller regulating the psi. Can I remove the line that connects to the other nipple on the wg actuator, plug that and remove the entire line that runs to the wg solenoid???
im talking about the long green line. Do I just pull that and plug the nipple on the actuator??
Thanks
im talking about the long green line. Do I just pull that and plug the nipple on the actuator??
Thanks
Last edited by spoolage; 06-30-03 at 10:10 AM.
06-30-03, 10:36 AM
#2
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Yes, you HAVE to do that. Plug the actuator nipple and then make sure to plug the line as well. You don't have to remove the line, if you do, you will have to plug the solenoid nipple.
