3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Installing CJ Motorsports Rail - Fuel Line verification Question

Thread Tools
 
Search this Thread
 
Old 03-10-12, 12:40 PM
  #1  
Back in the BOOST Game

Thread Starter
iTrader: (15)
 
Captain_Panic's Avatar
 
Join Date: Jun 2003
Location: Chicago IL
Posts: 698
Likes: 0
Received 1 Like on 1 Post
Installing CJ Motorsports Rail - Fuel Line verification Question

OK, before I go much further I want to make sure I have this right. There are 3 fuel lines:

Evap
Feed
Return

That run underneath the car. As best I can tell from the FSM and my setup, the Closest hard line to the transmission - is the EVAP. The Middle Line under the car is the Feed to the Secondary Rail. The line on the outside furthest from the transmission, is the Return coming from the Primary rail.


Yes or no?

Thanks
Old 03-10-12, 03:51 PM
  #2  
Back in the BOOST Game

Thread Starter
iTrader: (15)
 
Captain_Panic's Avatar
 
Join Date: Jun 2003
Location: Chicago IL
Posts: 698
Likes: 0
Received 1 Like on 1 Post
OK. after further searching and review. The Middle line (White Dot on the hose and the original stock Brass piping) is indeed the line that runs to the secondary rail... but i had it backwards. That is the Return Line. The feed line is the outside line that runs to the primary rail. The internal is the evap.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
astrum
2nd Generation Specific (1986-1992)
24
11-15-17 08:44 AM
gabescanlon
Interior / Exterior / Audio
1
08-11-15 05:59 PM



Quick Reply: Installing CJ Motorsports Rail - Fuel Line verification Question



All times are GMT -5. The time now is 07:21 PM.