Injector Wiring

Reply Subscribe

Thread Tools

Search this Thread

Jun 12, 2012 | 03:48 PM

AlbertFD3

Thread Starter

Full Member

iTrader: (3)

Joined: Dec 2011

Posts: 96

Likes: 0

From: Bay Area, CA

Injector Wiring

Does anyone have or can tell me the color wiring for the primary and secondary injectors? I'm installing back my harness after the rebuild and i want to make sure I'm installing them in the right order.

Jun 12, 2012 | 04:24 PM

mxracer_84

1.3 Litre V8 Eater

iTrader: (5)

Joined: Sep 2009

Posts: 98

Likes: 0

From: Winkler, Manitoba

When I did mine, I looked it up in the wiring diagram. If you don't already have all the shop manuals I suggest you download them.

Jun 12, 2012 | 05:30 PM

AlbertFD3

Thread Starter

Full Member

iTrader: (3)

Joined: Dec 2011

Posts: 96

Likes: 0

From: Bay Area, CA

I can't find anything on which goes which...any help would be great

Jun 12, 2012 | 06:39 PM

DOHC Vobra

Full Member

Joined: Mar 2002

Posts: 143

Likes: 1

From: Simi Valley, CA

I asked the same question a while back, thanks to DaleClark for the answer:

"Shop manual page F-62" (it has the colors for each of the injectors)

HTH

Justin

Jun 12, 2012 | 06:50 PM

AlbertFD3

Thread Starter

Full Member

iTrader: (3)

Joined: Dec 2011

Posts: 96

Likes: 0

From: Bay Area, CA

Quote:

Originally Posted by DOHC Vobra

I asked the same question a while back, thanks to DaleClark for the answer:

"Shop manual page F-62" (it has the colors for each of the injectors)

HTH

Justin

Thanks i saw that, it is weird because the only color that matches is the rear secondary, the other 3 do not match. I know they should be a green color but mine are like brown.

Jun 12, 2012 | 06:56 PM

DOHC Vobra

Full Member

Joined: Mar 2002

Posts: 143

Likes: 1

From: Simi Valley, CA

Mine also looked brown, I'm pretty sure that the wires were just really discolored. Run a continuity check from the ECM side of the harness to each of the injectors, and you'll know which is which.

Jun 12, 2012 | 07:05 PM

AlbertFD3

Thread Starter

Full Member

iTrader: (3)

Joined: Dec 2011

Posts: 96

Likes: 0

From: Bay Area, CA

Quote:

Originally Posted by DOHC Vobra

Mine also looked brown, I'm pretty sure that the wires were just really discolored. Run a continuity check from the ECM side of the harness to each of the injectors, and you'll know which is which.

That is true i forgot about doing that. Thanks really appreciate the help