3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

info needed about datalogging

Thread Tools
 
Search this Thread
 
Old May 5, 2006 | 08:20 PM
  #1  
f150rx7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 208
Likes: 0
From: Rancho Cucamonga
info needed about datalogging

What exactly is datalogging?
Reply
Old May 5, 2006 | 08:31 PM
  #2  
DaleClark's Avatar
RX-7 Bad Ass
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (56)
 
Joined: Jan 2002
Posts: 15,622
Likes: 2,723
From: Pensacola, FL
It's simply that - logging data . People with PowerFC's use the Datalogit box, which plugs into the PowerFC and records all the information from the sensors the PFC sees. You can make a full throttle run, then examine the log. You can then see lots of information - like if you were running rich or lean at a particular RPM or boost, if you had knock, what timing you were running, etc.

When you're tuning a car in, it's impossible to watch all your gauges at one time to figure out where you need to make adjustments in your fuel or ignition map. Think of it as videotaping all the gauges, then you can play it back one frame at a time.

Most aftermarket ECU's support datalogging. The stock ECU does, but no one has ever cracked the datalogging feature. You'd need a special and VERY expensive tool to do it.

Dale
Reply
Old May 6, 2006 | 03:23 AM
  #3  
f150rx7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 208
Likes: 0
From: Rancho Cucamonga
Good explanation, some great knowledge in this forum THanks.
Reply
Old May 6, 2006 | 03:33 AM
  #4  
f150rx7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 208
Likes: 0
From: Rancho Cucamonga
Where can you get a datalogit box and are there many kinds? I dont plan on tuning my car myself but Im very intrested in learning how to watch the parameters so i can at least know what the engine is doing and maybe prevent some damage by seeing it in advance.It's just how I learn things so maybe in the long run I can gain knowledge in tuning but of course that will take time,money, mistakes,risk you need to take...
Reply
Old May 6, 2006 | 03:54 AM
  #5  
rx7swe's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 39
Likes: 1
From: sweden
I´m planning to go for the Zeitronix datalogger that you connect to a pc. It have an afr and alot of inputs so I don´t need so many gauges.
Reply
Old May 6, 2006 | 12:25 PM
  #6  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
Most wideband setups have datalogging capabilities, but the best setup is to use the FC-Datalogit box in conjunction with the Apexi PFC.
Reply
Old May 6, 2006 | 07:08 PM
  #7  
f150rx7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 208
Likes: 0
From: Rancho Cucamonga
do they call it FC datalogit box because it's made to work with the power FC?Who sells it?
Reply
Old May 6, 2006 | 07:13 PM
  #8  
Taikutsu's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 451
Likes: 0
From: Hawaii
www.rx7.com
Reply
Old May 7, 2006 | 04:38 AM
  #9  
f150rx7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 208
Likes: 0
From: Rancho Cucamonga
what are the real advantages of other stand alone systems like haltech over the power fc, whats the big main difference and advantages of each over another, is there even any?
Reply
Old May 7, 2006 | 04:50 AM
  #10  
kenn_chan's Avatar
Savanna Rx-7
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: Jun 2004
Posts: 1,577
Likes: 12
From: yokosuka japan
PFC = plug and play

haltech = you wire it up to the sensors make a harness and play.

there are other pros cons to each of the models, but for most of us that is the biggest difference

kenn
Reply
Old May 7, 2006 | 08:13 PM
  #11  
f150rx7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 208
Likes: 0
From: Rancho Cucamonga
WHat about operation though?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thecody59
1st Generation Specific (1979-1985)
40
Aug 23, 2015 06:41 PM




All times are GMT -5. The time now is 09:17 AM.