I'm Almost Happy With My Setup
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
I'm Almost Happy With My Setup
So I haven't posted anything about my FD for some time and that's probably because it's been down for some time. Rebuild and a bunch of other stuff..
Have to thank the guys at www.GothamRacing.com for doing such a great job and making sure that i came out a happy camper in the end. Very cool doods and will take care of ya.
So this is what I added to what's in my mod list in my sig.
- Garett GT35/40 Turbo Kit. Down Pipe & Manifold Ceramic Coated
- 45mm Turbosmart Wastegate
- Mid Pipe
- Greddy Race Plugs
- NGK Plug Wires
- Supra Fuel Pump
- Pri Fuel Rail Milled w/850cc - Sec Top Feed Rail w/1600cc Injectors
- SX Fuel Pressure Regulator
- 3 Bar Map Sensor
- Eurathane Motor mounts
- 9Lb Racing Beat Flywheel
- Volk Gramlight 57Pro 17x9 & 17x10 Wrapped in 235/40 & 275/40 Yokohama ES100
Have to thank the guys at www.GothamRacing.com for doing such a great job and making sure that i came out a happy camper in the end. Very cool doods and will take care of ya.
So this is what I added to what's in my mod list in my sig.
- Gotham Racing Large Streetport w/3mm Mazda Apex Seals (Engine Photos 1 - 2)
- Garett GT35/40 Turbo Kit. Down Pipe & Manifold Ceramic Coated
- 45mm Turbosmart Wastegate
- Mid Pipe
- Greddy Race Plugs
- NGK Plug Wires
- Supra Fuel Pump
- Pri Fuel Rail Milled w/850cc - Sec Top Feed Rail w/1600cc Injectors
- SX Fuel Pressure Regulator
- 3 Bar Map Sensor
- Garfinkle Engine Torq Brace
- Eurathane Motor mounts
- 9Lb Racing Beat Flywheel
- Volk Gramlight 57Pro 17x9 & 17x10 Wrapped in 235/40 & 275/40 Yokohama ES100
Haven't hit the dyno yet but running around town with 10psi and have the Profec high set to 15psi...Feels great and i am smiling
I still need a greddy mushroom filter with a 4" inlet if anyone knows where to get one...Right now I have an old K&N filter that was crushed to fit properly.
Last edited by apneablue; 10-29-04 at 10:06 PM.
Trending Topics
#10
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by SpeedKing
Dave, you have one of the nicest and cleanest FDs ever! But aren't you going back to Jamaica soon, then selling the car?
#12
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by busy13b
Wow!! That engine bay is a thing of beauty!!!
"single turbo - it's what's for dinner.."
"single turbo - it's what's for dinner.."
This one is my Fav!
#17
Rotary Freak
Join Date: Sep 2004
Location: Bay Area, CA
Posts: 2,444
Likes: 0
Received 0 Likes
on
0 Posts
Very nice!
BTW, all that money spent and you're running ES 100's? Any reason you didn't go with a tire with higher performance, especially since you're laying down some serious horsepower?
BTW, all that money spent and you're running ES 100's? Any reason you didn't go with a tire with higher performance, especially since you're laying down some serious horsepower?
#18
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by BlueRex
Very nice!
BTW, all that money spent and you're running ES 100's? Any reason you didn't go with a tire with higher performance, especially since you're laying down some serious horsepower?
BTW, all that money spent and you're running ES 100's? Any reason you didn't go with a tire with higher performance, especially since you're laying down some serious horsepower?
#23
#25
3 and the hit for $100?
iTrader: (1)
gotham racing fucked my brother over, he bought a BPU setup for his supra from there b/c they had the cheapest prices on ****... it took almost a month for the **** to get here, and they called him up asking for more money. im suprized the **** even came. its not very professional to call someone up after a sale and ask for more money either. i definitly wont buy anything from them, im glad that your setup turned out as good as it did tho. looks beautiful.