Got done with the sequential simplification and when cold my idle is really rough and low. It idles around the 400 RPM or so, but after it warms up it idles around 900 RPM.

Another problem I jsut noticed today is that when I'm idleing (warm or cold) and I turn on the a/c, the idle drops really low to aorund 100-200 rpm and the car wants to die.

Any ideas on how to fix this?

 

Did you eliminate either the throttle body coolant lines or the cold idle cam?

 

yes, both.

 

was it doing it before the simplication?

 

nope.

 

and did you elimintate the throttle body coolant at that moment or before?

 

eliminated it at the same time as the simplification.

 

ok, did you do it the rob robinnette's way?

have you wired open the hot idle cam?

 

I did it the other way on his site, I removed the spring and tightend the screw down all te way.

How would this effect the the a/c problem?

 

bump

 

also my a/c doesn't seem to be working, and it has enough freon.

 

I think you'll need those if you want a smooth cold idle.

 

I don't really care if cold idle is rough. mainly whats bothering me is how it wants to die with the a/c on.
lets continue this in my new thread https://www.rx7club.com/forum/showth...hreadid=195667