3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Idle problem

Thread Tools
 
Search this Thread
 
Old Apr 9, 2009 | 12:45 AM
  #1  
Shane510's Avatar
Thread Starter
Full Member
 
Joined: Mar 2008
Posts: 83
Likes: 0
From: Redding, CA
Idle problem

Upon turning the key and initially starting my FD the idle shoots way up to 3,000 RPMs, give it a little bit of gas and it calms back down to right around 1,000 RPMs. A friend of mine suggested it could be the idle control valve sensor, any input is appreciated. Thanks.
Reply
Old Apr 9, 2009 | 01:22 AM
  #2  
apeiron
Tenured Member 20 Years
iTrader: (2)
 
Joined: Oct 2002
Posts: 1,773
Likes: 0
From: Boulder, CO
This is normal, it is the cold start feature to help accelerate the warm up of the engine.... But as you have already learned, blipping the throttle disables it!
Reply
Old Apr 9, 2009 | 01:30 AM
  #3  
Shane510's Avatar
Thread Starter
Full Member
 
Joined: Mar 2008
Posts: 83
Likes: 0
From: Redding, CA
Originally Posted by spoolage
This is normal, it is the cold start feature to help accelerate the warm up of the engine.... But as you have already learned, blipping the throttle disables it!
It's been a while since I've driven the car but I don't remember it ever revving up this high before? hmmm
Reply
Old Apr 9, 2009 | 04:20 AM
  #4  
1QWIK7's Avatar
White chicks > *
Tenured Member: 20 Years
iTrader: (33)
 
Joined: Jul 2003
Posts: 13,147
Likes: 1
From: Secaucus, New Jersey
Start the car in 1st gear. That will also disable the AWS feature.

Obviously with the clutch pressed in, then when the car has started, put it back to neutral and release clutch.

I been doing this since first ownership of my car.
Reply
Old Apr 9, 2009 | 02:14 PM
  #5  
Shane510's Avatar
Thread Starter
Full Member
 
Joined: Mar 2008
Posts: 83
Likes: 0
From: Redding, CA
Originally Posted by 1QWIK7
Start the car in 1st gear. That will also disable the AWS feature.

Obviously with the clutch pressed in, then when the car has started, put it back to neutral and release clutch.

I been doing this since first ownership of my car.
This could have been how I was starting it and never noticed the AWS feature.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 01:25 AM.