I've been having a terrible time with my idle. I've replaced the dashpot and idle speed controller, cleaned my throttle plates, eliminated the fast idle/wax rod, and now I can't even stay running. I didn't do this all at once. Right after I removed the fast idle cam I was able to start it up, but it wants to stall. Now it is flooded and the throttle settings are all messed up. The TPS is within range.

How do I reset the throttle plate positions to start new?

 

As soon as I posted this thread I realized I might have knocked the map sensor hose off. Well I did. Ignore this thread. I am an idiot.