I really need help with my seats
#1
Senior Member
Thread Starter
Join Date: Dec 2003
Location: Montreal
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
I really need help with my seats
I bought these original Torinos from Sparco, and when my bro made them rails mods, he couldnt shut the door right after, could anyone PLEASE PLEASE point me in the right direction. Is there any write ups? if they are, I can't seem to find them on the board with the search function. I know you guys are gonna say search, but I've been trying ever since I bought these seats 2 months ago. I would really appreciate it if someone could just show me a write up with some dimensions and pics of the install.
Please?
Please?
#3
Senior Member
Thread Starter
Join Date: Dec 2003
Location: Montreal
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
We'll what ticks me off a little more is that SOME poeple like lets say Goodfellow, has them in their car, and claim they do fit, but I dont know how I could make them fit, and would like some help for this.
#5
~17 MPG
iTrader: (2)
I believe the saying goes: "Measure twice, cut once."
How much clearance is there on the other side (center of the car)? It sounds like you need to measure again (and again and again...) and modify your design.
This is all assuming that you've got the exact same seats as what others have used. Sparco Torinos are NOT the same width as every other seat made by Sparco, for instance the SPG's, etc...
Best of luck,
-s-
How much clearance is there on the other side (center of the car)? It sounds like you need to measure again (and again and again...) and modify your design.
This is all assuming that you've got the exact same seats as what others have used. Sparco Torinos are NOT the same width as every other seat made by Sparco, for instance the SPG's, etc...
Best of luck,
-s-
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM