I need Some Help with My PROFEC B SPEC II
I need Some Help with My PROFEC B SPEC II
i threw it on and i'm just Limping it everywhere. I read the instructions about 4 times and everytime i'm in the car and i'm trying to tune the sucker, i just can't comprehend this thing.
Set, GAIN , sET gain, kpa displayed currently- i don't know (kpa). anyways if any guru's out there have about 5 minutes to explain alittle i would greatly appreciate it.
supposedly it's easy , i'm just a dumbass.
Set, GAIN , sET gain, kpa displayed currently- i don't know (kpa). anyways if any guru's out there have about 5 minutes to explain alittle i would greatly appreciate it.supposedly it's easy , i'm just a dumbass.
did you spend time reading the manual? I would say not since you don't know how to change the KPA to psi mode
.
Seriously, do yourself a favor and read it carefully it will only help you. Otherwise you are going to spend 3x times as much time tuning it. Nevermind the wasted gas and possibility of getting caught by cops because of multiple 100+ MPH WOT runs.
.Seriously, do yourself a favor and read it carefully it will only help you. Otherwise you are going to spend 3x times as much time tuning it. Nevermind the wasted gas and possibility of getting caught by cops because of multiple 100+ MPH WOT runs.
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/controlling-boost-controller-627963/
here is my thread that explains it
here is my thread that explains it
Thread
Thread Starter
Forum
Replies
Last Post
Rotary12Ahead
1st Generation Specific (1979-1985)
9
Oct 29, 2015 03:16 PM
edgars95rx7
Link Vi-PEC
0
Oct 1, 2015 01:59 PM
joel(PA)
Race Car Tech
0
Oct 1, 2015 10:25 AM






