I need help......The power windows will not roll up but they will roll down.
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: coppell,TX,US
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I need help......The power windows will not roll up but they will roll down.
i took the drivers side window switch box apart found one of the plastic tabs fell off if any one knows how it works or can at least tell me a way to raise my window for now???????//
Thanks, James
Thanks, James
#3
Junior Member
Thread Starter
Join Date: Mar 2001
Location: coppell,TX,US
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
which connection?
Want to race--- I pulled the box out of the door panel and picked it up there was like 5-6 connections solderd to the bottem but i think its the plastic clip the you use to put the window up--- The passanger side and driver side lost resistance.
#4
Full Member
Join Date: Feb 2001
Location: Austin, Texas, USA!
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
I had this happen to me twice. The switch on the driver's door would lower the passenger window, but when you pulled up on the switch to raise the window, there was no resistance on the switch. I'm not talking about electrical resistance, I'm talking about physical resistance, you know that springy feeling that returns the switch to its neutral position. I was able to disassemble the switch and repair a little broken actuator lever inside with super glue (no electrical work required). I was able to operate the pass. window with the pass. door switch. The next time it broke about 18 - 24 months later, (the glue finally gave way) I had warranty replace it.