3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

I Need Help

Thread Tools
 
Search this Thread
 
Old 03-16-02, 03:27 AM
  #1  
Senior Member

Thread Starter
 
93TTRX7's Avatar
 
Join Date: Feb 2002
Location: Southern California-Glendale
Posts: 705
Likes: 0
Received 0 Likes on 0 Posts
Unhappy I Need Help

I got a problem. My car is at 55 thousand miles on an original motor, and I get some smoke and smell of oil burning from the passenger side of the car. When I take a look at the area under the intake hose, I see oil stains on the y pipe (i think that's what it is) and i see wet oil around what seems to be the gasket that is connected to the pipe that hits the intercooler to the y pipe. When I looked under that after running the car hard, I noticed an orange glowing thing. WHAT THE **** WAS THAT? It is a little triangle shaped opening with a plug going in there, and it was orange and you could see that inside was really hot like a combustion chamber. Could you guys identify the problem for me? I guess to sum it up...

1) Would the Y Pipe gasket leak oil to start smoking as the oil burns off teh hot pipe?

and

2) what was the glowing thing? Is it normal?

I really gotta get rid of that pre cat...that piece of **** is right next to one of the turbos! :/
Old 03-16-02, 03:28 AM
  #2  
Senior Member

Thread Starter
 
93TTRX7's Avatar
 
Join Date: Feb 2002
Location: Southern California-Glendale
Posts: 705
Likes: 0
Received 0 Likes on 0 Posts
BTW my car idles really well...I'm getting a boost gauge soon so I can see if how much boost I'm running. Car is bone stock for now...
Old 03-16-02, 03:08 PM
  #3  
Senior Member

Thread Starter
 
93TTRX7's Avatar
 
Join Date: Feb 2002
Location: Southern California-Glendale
Posts: 705
Likes: 0
Received 0 Likes on 0 Posts
post to top
Old 03-16-02, 03:16 PM
  #4  
Adrenaline

 
RecKleSs's Avatar
 
Join Date: Feb 2001
Location: Long Island, NY
Posts: 1,261
Likes: 0
Received 0 Likes on 0 Posts
A little bit of oil in the ic hoses and Y-Pipe is pretty normal. Take some hand tools and take it all apart and clean it up with a rag, to get rid of some oil build up in there. Also, make sure everything is properly tighten, most likely it's not tighten and that is why you are noticing the oil.




All times are GMT -5. The time now is 08:00 PM.