3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

I goofed and need some help

Thread Tools
 
Search this Thread
 
Old 10-16-09, 12:51 AM
  #1  
Junior Member
Thread Starter
 
Rexy225's Avatar
 
Join Date: Jul 2009
Location: Slc Utah
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
I goofed and need some help

Ok, While doing my motor swap out of the one thing I forgot to mark were the fuel lines. Now I am not sure which of the three lines hook up where on the hard lines. does any body know which one goes where or some detailed pics of them installed. I have checked my service manual and cannot get a detailed enough picture to see them.
Old 10-16-09, 01:12 AM
  #2  
Full Member

iTrader: (2)
 
zweetz32's Avatar
 
Join Date: Apr 2009
Location: Chicago
Posts: 238
Received 4 Likes on 4 Posts
on the engine side hard lines. First one, looking at it from the front of car, is the fuel delivery line. The second one should be higher then the other 2, that one is the evap, the last one is the return line. On the firewall side. the one towards the passenger side is the evap, middle is return, driver is delivery.


if you REALLY need it, I'll take some pictures for you.
Old 10-16-09, 05:32 AM
  #3  
All Spooled Up

iTrader: (7)
 
badddrx7's Avatar
 
Join Date: Nov 2001
Location: Ironton,ohio
Posts: 2,752
Likes: 0
Received 3 Likes on 3 Posts
Search





later
Old 10-16-09, 05:57 AM
  #4  
7th Heaven

iTrader: (9)
 
slpin's Avatar
 
Join Date: Nov 2004
Location: California
Posts: 3,654
Likes: 0
Received 1 Like on 1 Post
charcoal canister one goes to the top one
fuel line just slap it on
if it doesnt start you got it backwards

or just stick your finger in and follow it
one closest to the fpr is the return line
Old 10-16-09, 03:44 PM
  #5  
Junior Member
Thread Starter
 
Rexy225's Avatar
 
Join Date: Jul 2009
Location: Slc Utah
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
thanks that helps a ton. Will post update if she starts. If not back to the drawing boards. I thought that's how I had it hooked up but it never fired on it's own but will on starting fluid. So hopefully my injectors are getting signal.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Devon300zx
2nd Generation Specific (1986-1992)
3
09-17-15 03:50 PM
DaleClark
Interior / Exterior / Audio
2
12-03-07 05:22 AM
InMyWhiteTII
2nd Generation Specific (1986-1992)
4
01-08-06 09:03 PM



Quick Reply: I goofed and need some help



All times are GMT -5. The time now is 08:01 PM.