3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Are the hvac controls on the 93 and the 94 the same?

Thread Tools
 
Search this Thread
 
Old Jul 17, 2003 | 01:35 PM
  #1  
allrotor93's Avatar
Thread Starter
Lives on the Forum
Tenured Member 15 Years
iTrader: (126)
 
Joined: Jul 2001
Posts: 6,703
Likes: 3
From: Cary, NC
Are the hvac controls on the 93 and the 94 the same?

my temp controller on my 94 spins freely. the actual control behind the plastic spins all the way around.
Reply
Old Jul 17, 2003 | 07:04 PM
  #2  
turbojeff's Avatar
Do it right, do it once
Tenured Member 15 Years
iTrader: (30)
 
Joined: Apr 2001
Posts: 4,830
Likes: 14
From: Eugene, OR, usa
The front is different cosmetically. The controls behind the panel should be the same. You might take a look at the control the **** is attached to. It is probably loose, not broken. I've had this happen, basically there is a thin nut that holds the control to the panel (**** removed).
Reply
Old Jul 17, 2003 | 08:34 PM
  #3  
jons3rdgen's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 124
Likes: 0
From: indiana
I had the same thing happen to me and all I did was tighten the nut.
Reply
Old Jul 17, 2003 | 10:42 PM
  #4  
allrotor93's Avatar
Thread Starter
Lives on the Forum
Tenured Member 15 Years
iTrader: (126)
 
Joined: Jul 2001
Posts: 6,703
Likes: 3
From: Cary, NC
awesome. i will try that tomorrow.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bauer778
3rd Generation Specific (1993-2002)
10
Nov 4, 2015 04:42 PM
alexdimen
3rd Generation Specific (1993-2002)
20
Oct 23, 2015 01:50 PM
frijol
Microtech
7
Sep 23, 2015 12:51 PM
Heedlessone
Group Buy & Product Dev. FD RX-7
0
Sep 16, 2015 11:31 AM




All times are GMT -5. The time now is 03:58 AM.